0%

Ii-relay zokukhusela

Ugqithiso lwe-AMR

  • Amagalelo angoku kunye nombane njengoko kufuneka
  • Igalelo ledijithali kunye nemveliso njengoko kufuneka
  • Isikrini esikhulu sokuchukumisa
  • RS232 kunye RS485 izibuko
  • Inkxaso yonxibelelwano lwe-IEC 61850 protocol
Ugqithiso lwe-AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Imisebenzi yokukhusela

U<ANSI 27

Ukukhuselwa ngaphantsi kombane

Trips when the voltage falls below the setting.

U>ANSI 59

Ukukhuselwa kombane ogqithisileyo

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Ukukhuselwa kwe-Overcurrent non-directional

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Ukukhuselwa komhlaba okungekho mkhombandlela

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Ukhuseleko olugqithisiweyo lwe-Directional

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

UKhuseleko oluNxibelela phantsi

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Ukhuseleko lwecandelo elibi

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Ukukhuselwa kokugqithiswa

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Ukukhuselwa kokusilela okungundoqo

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

umsebenzi wokubona umthwalo obandayo (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Inrush yangoku umsebenzi wokufumanisa

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Ukukhuselwa okwahlukileyo

Compares the currents into and out of the plant and clears faults inside the zone fast.

Iimpawu zeSoftware

01Inommandla wesoftware onamandla kwaye kulula ukuyisebenzisa ukuseta imisebenzi eyahlukeneyo
02Ukukwazi ukurekhoda ukuya kuma-oscillographs angama-200, uhambo lokuhamba
03Unamaqela ama-4 olawulo
04Imodyuli yoMqondiso wesoftware yokunikezela ngemiqondiso yokusebenza ukuhambisa amagalelo kunye neziphumo
05Ukukwazi ukukhupha useto lwe-relay kwifomathi ye-XRio

Izatifikethi zokudlulisa

  • Power Research Institute