0%

Relay banbɔ

AMR relay a wɔde ma

  • Current ne voltage inputs sɛnea ɛho hia
  • Digital input ne output sɛnea ɛho hia
  • touch screen kɛse bi
  • RS232 ne RS485 hyɛn gyinabea ahorow
  • Mmoa a wɔde ma IEC 61850 nkitahodi nhyehyɛe
AMR relay a wɔde ma
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Dwumadi ahorow a ɛbɔ wɔn ho ban

U<ANSI 27

Ahobammɔ a wɔbɔ wɔ ahoɔden a ɛba fam ho (ANSI 27) .

Trips when the voltage falls below the setting.

U>ANSI 59

Ahobammɔ a wɔbɔ wɔ ahoɔden a ɛboro so (ANSI 59) .

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Ahobammɔ a ɛnyɛ akwankyerɛ a ɛfa nsu a ɛboro so ho (ANSI 50-51) .

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Asase so ahobammɔ a ɛnyɛ akwankyerɛ (ANSI 50N-51N) .

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Akwankyerɛ a ɛfa nsuo a ɛboro so ho banbɔ (ANSI 67-67 TOC) .

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Akwankyerɛ Fa Fam Ahobammɔ (ANSI 67N-67N TOC) .

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Negative component overcurrent ahobammɔ

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Nneɛma a ɛboro so ho banbɔ (ANSI 49) .

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Safoa huammɔdi ahobammɔ (ANSI 50BF) .

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

awɔw mu adesoa a wɔde hu adwuma (CLP) .

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Inrush mprempren detection adwuma

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Nsonsonoe ho banbɔ (ANSI 87) .

Compares the currents into and out of the plant and clears faults inside the zone fast.

Software no mu nneɛma a ɛwɔ hɔ

01Ɛwɔ software tebea a tumi wom na ɛnyɛ den sɛ wɔde bedi dwuma a wɔde hyehyɛ dwumadi ahorow
02Tumi a wotumi kyere oscillographs a ɛkɔ soro kodu 200, akwantu ho kyerɛwtohɔ
03Ɔwɔ mmarahyɛ akuw 4
04Signal Routing software module a wɔde ma dwumadie nsɛnkyerɛnneɛ ma relay inputs ne outputs
05Tumi a ɛde relay nhyehyɛe ahorow a ɛwɔ XRio format mu no fi adi

Relay adansedi nkrataa

  • Tumi Nhwehwɛmu Asoɛe