0%

Mga protection relay

AMR relay

  • Mga input ng kasalukuyang at boltahe kung kinakailangan
  • Digital input at output kung kinakailangan
  • Malaking touch screen
  • RS232 at RS485 port
  • Suporta para sa IEC 61850 na protocol ng komunikasyon
AMR relay
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Mga pag-andar ng proteksyon

U<ANSI 27

Proteksyon sa undervoltage

Trips when the voltage falls below the setting.

U>ANSI 59

Proteksyon sa sobrang boltahe

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Non-directional overcurrent na proteksyon

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Proteksyon sa non-directional grounding

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Proteksyon ng overcurrent ng direksyon

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Proteksyon sa Directional Grounding

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Negatibong bahagi ng overcurrent na proteksyon

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Proteksyon sa sobrang karga

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Proteksyon ng key failure

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

cold load detection function (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Inrush kasalukuyang function ng detection

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Differential na proteksyon

Compares the currents into and out of the plant and clears faults inside the zone fast.

Mga tampok ng software

01Mayroon itong malakas at madaling gamitin na kapaligiran ng software para sa pagse-set up ng iba't ibang function
02Kakayahang mag-record ng hanggang 200 oscillographs, trip log
03May 4 na pangkat ng regulasyon
04Module ng software ng Signal Routing para sa pagtatalaga ng mga signal ng function upang i-relay ang mga input at output
05Kakayahang mag-output ng mga setting ng relay sa format na XRio

Mga sertipiko ng relay

  • Power Research Institute