0%

Li-relay tsa tšireletso

Setšoantšo sa AMR

  • Lisebelisoa tsa hona joale le tsa voltage ha ho hlokahala
  • Kenyelletso le tlhahiso ea dijithale ha ho hlokahala
  • Skrine se seholo sa ho ama
  • Likou tsa RS232 le RS485
  • Ts'ehetso bakeng sa protocol ea puisano ea IEC 61850
Setšoantšo sa AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Mesebetsi e sireletsang

U<ANSI 27

Tšireletso ea Undervoltage

Trips when the voltage falls below the setting.

U>ANSI 59

Tšireletso ea overvoltage

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Tšireletso ea overcurrent e seng ea tataiso

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Tšireletso ea motheo e se nang tataiso

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Tšireletso ea Directional overcurrent

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Tšireletso ea ho Fana ka Taelo

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Negative karolo tshireletso overcurrent

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Tšireletso e feteletseng

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Tšireletso ea ho hloleha ha senotlolo

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

mosebetsi oa ho lemoha moroalo o batang (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Ts'ebetso ea hona joale ea ho lemoha inrush

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Tšireletso e fapaneng

Compares the currents into and out of the plant and clears faults inside the zone fast.

Lisebelisoa tsa software

01E na le tikoloho ea software e matla le e bonolo ho e sebelisa bakeng sa ho theha mesebetsi e fapaneng
02Bokhoni ba ho rekota li-oscillographs tse fihlang ho 200, log log
03E na le lihlopha tse 4 tsa taolo
04Mojule oa software ea Signal Routing bakeng sa ho abela matshwao a tshebetso ho fetisa dikenyo le diphetho
05Bokhoni ba ho hlahisa litlhophiso tsa relay ka sebopeho sa XRio

Litifikeiti tsa ho fetisa

  • Setsi sa Patlisiso ea Matla