U<ANSI 27
The remote server returned an error: (400) Bad Request.
Trips when the voltage falls below the setting.
ꯄ꯭ꯔꯣꯇꯦꯛꯁꯟ ꯔꯤꯂꯦꯁꯤꯡ
The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.
IEC 61850
communication protocol
RS232 · RS485
serial ports
Touch
large touch screen
The remote server returned an error: (400) Bad Request.
U>ANSI 59
The remote server returned an error: (400) Bad Request.
Trips when the voltage rises above the setting.
I>> / I>ANSI 50/51
The remote server returned an error: (400) Bad Request.
Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.
IE>> / IE>ANSI 50N/51N
The remote server returned an error: (400) Bad Request.
Instantaneous and time-delayed protection against residual current and phase-to-earth faults.
I> →ANSI 67
The remote server returned an error: (400) Bad Request.
Overcurrent that checks the power direction, operating only for forward or reverse faults.
IE> →ANSI 67N
The remote server returned an error: (400) Bad Request.
Directional earth fault, for ring networks and parallel feeders.
I2>ANSI 46
The remote server returned an error: (400) Bad Request.
Detects unbalance, broken conductors and single phasing from the negative-sequence current.
θ>ANSI 49
The remote server returned an error: (400) Bad Request.
A thermal model of the plant that trips before a cable, transformer or motor overheats.
CBFANSI 50BF
The remote server returned an error: (400) Bad Request.
Trips the upstream breakers when a breaker fails to open after a trip command.
I> ↑CLP
The remote server returned an error: (400) Bad Request.
Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.
I2f / I1fInrush
The remote server returned an error: (400) Bad Request.
Recognises transformer inrush from the second harmonic and blocks false trips.
Id>ANSI 87
The remote server returned an error: (400) Bad Request.
Compares the currents into and out of the plant and clears faults inside the zone fast.
The remote server returned an error: (400) Bad Request.
01The remote server returned an error: (400) Bad Request.
02The remote server returned an error: (400) Bad Request.
03The remote server returned an error: (400) Bad Request.
04The remote server returned an error: (400) Bad Request.
05The remote server returned an error: (400) Bad Request.
The remote server returned an error: (400) Bad Request.
- The remote server returned an error: (400) Bad Request.