0%

보호 계전기

AMR 릴레이

  • 필요에 따라 전류 및 전압 입력
  • 필요에 따라 디지털 입력 및 출력
  • 대형 터치스크린
  • RS232 및 RS485 포트
  • IEC 61850 통신 프로토콜 지원
AMR 릴레이
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

보호 기능

U<ANSI 27

저전압 보호

Trips when the voltage falls below the setting.

U>ANSI 59

과전압 보호

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

무방향 과전류 보호

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

무방향 접지 보호

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

방향성 과전류 보호

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

방향 접지 보호

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

부정적인 구성요소 과전류 보호

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

과부하 보호

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

키 오류 보호

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

냉부하 감지 기능(CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

돌입 전류 감지 기능

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

차동 보호

Compares the currents into and out of the plant and clears faults inside the zone fast.

소프트웨어 기능

01다양한 기능을 설정할 수 있는 강력하고 사용하기 쉬운 소프트웨어 환경을 갖추고 있습니다.
02최대 200개의 오실로그래프, 여행 로그를 기록하는 기능
034개의 규제 그룹이 있습니다
04기능 신호를 릴레이 입력 및 출력에 할당하기 위한 신호 라우팅 소프트웨어 모듈
05XRio 형식으로 릴레이 설정을 출력하는 기능

릴레이 인증서

  • 전력연구소