0%

Relè di protezione

Relè AMR

  • Ingressi di corrente e tensione secondo necessità
  • Ingresso e uscita digitale secondo necessità
  • Ampio schermo tattile
  • Porte RS232 e RS485
  • Supporto per il protocollo di comunicazione IEC 61850
Relè AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Funzioni protettive

U<ANSI 27

Protezione da sottotensione

Trips when the voltage falls below the setting.

U>ANSI 59

Protezione da sovratensione

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Protezione da sovracorrente non direzionale

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Protezione di terra non direzionale

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Protezione da sovracorrente direzionale

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Protezione di messa a terra direzionale

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Protezione da sovracorrente del componente negativo

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Protezione da sovraccarico

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Protezione da guasti chiave

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

funzione di rilevamento del carico freddo (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Funzione di rilevamento della corrente di spunto

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Protezione differenziale

Compares the currents into and out of the plant and clears faults inside the zone fast.

Funzionalità del software

01Dispone di un ambiente software potente e facile da usare per l'impostazione di varie funzioni
02Possibilità di registrare fino a 200 oscillografi, registro di viaggio
03Ha 4 gruppi regolatori
04Modulo software di instradamento dei segnali per l'assegnazione dei segnali funzionali agli ingressi e alle uscite relè
05Possibilità di emettere le impostazioni del relè in formato XRio

Certificati di inoltro

  • Istituto di ricerca sull'energia