0%

Védelmi relék

AMR relé

  • Szükség szerint áram és feszültség bemenetek
  • Digitális bemenet és kimenet igény szerint
  • Nagy érintőképernyő
  • RS232 és RS485 portok
  • IEC 61850 kommunikációs protokoll támogatása
AMR relé
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Védő funkciók

U<ANSI 27

Feszültségcsökkenés elleni védelem

Trips when the voltage falls below the setting.

U>ANSI 59

Túlfeszültség védelem

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Nem irányított túláramvédelem

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Nem irányított földelés védelem

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Irányított túláramvédelem

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Irányított földelésvédelem

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Negatív komponens túláramvédelem

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Túlterhelés elleni védelem

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Kulcshiba elleni védelem

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

hidegterhelés-érzékelő funkció (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Bekapcsolási áram érzékelési funkció

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Differenciálvédelem

Compares the currents into and out of the plant and clears faults inside the zone fast.

Szoftver jellemzői

01Erőteljes és könnyen használható szoftveres környezettel rendelkezik a különféle funkciók beállításához
02Akár 200 oszcillográf rögzítése, kioldási napló
034 szabályozási csoportja van
04Signal Routing szoftver modul funkciójelek hozzárendeléséhez relé bemenetekhez és kimenetekhez
05Lehetőség a relébeállítások XRio formátumban történő kimenetére

Relé tanúsítványok

  • Erőműkutató Intézet