0%

Reléis de protección

Relé AMR

  • Entradas de corrente e tensión segundo sexa necesario
  • Entrada e saída dixital segundo sexa necesario
  • Pantalla táctil grande
  • Portos RS232 e RS485
  • Soporte para o protocolo de comunicación IEC 61850
Relé AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Funcións protectoras

U<ANSI 27

Protección de subtensión

Trips when the voltage falls below the setting.

U>ANSI 59

Protección contra sobretensión

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Protección non direccional de sobreintensidade

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Protección non direccional de toma de terra

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Protección de sobreintensidad direccional

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Protección direccional de toma de terra

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Protección contra sobreintensidade de compoñentes negativos

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Protección contra sobrecarga

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Protección contra fallos de chave

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

Función de detección de carga en frío (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Función de detección de corrente de arranque

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Protección diferencial

Compares the currents into and out of the plant and clears faults inside the zone fast.

Características do software

01Ten un ambiente de software potente e fácil de usar para configurar varias funcións
02Capacidade de gravar ata 200 oscilógrafos, rexistro de viaxe
03Ten 4 grupos reguladores
04Módulo de software de enrutamento de sinais para asignar sinais de función a entradas e saídas de relé
05Capacidade de emitir a configuración do relé en formato XRio

Certificados de retransmisión

  • Instituto de Investigación Energética