0%

Relés de protección

Relé AMR

  • Entradas de corriente y voltaje según sea necesario.
  • Entrada y salida digital según sea necesario
  • Gran pantalla táctil
  • Puertos RS232 y RS485
  • Soporte para el protocolo de comunicación IEC 61850
Relé AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Funciones protectoras

U<ANSI 27

Protección contra subtensión

Trips when the voltage falls below the setting.

U>ANSI 59

Protección contra sobretensión

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Protección contra sobrecorriente no direccional

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Protección de puesta a tierra no direccional

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Protección direccional de sobrecorriente

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Protección direccional de puesta a tierra

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Protección contra sobrecorriente del componente negativo

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Protección contra sobrecarga

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Protección contra fallos de clave

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

función de detección de carga fría (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Función de detección de corriente de irrupción

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Protección diferencial

Compares the currents into and out of the plant and clears faults inside the zone fast.

Funciones de software

01Tiene un entorno de software potente y fácil de usar para configurar varias funciones.
02Capacidad para registrar hasta 200 oscilógrafos, registro de viajes
03Tiene 4 grupos reguladores.
04Módulo de software de enrutamiento de señales para asignar señales de función a entradas y salidas de relé
05Capacidad para generar configuraciones de relé en formato XRio

Certificados de retransmisión

  • Instituto de Investigación de Energía