0%

Ochranná relé

relé AMR

  • Proudové a napěťové vstupy dle potřeby
  • Digitální vstup a výstup dle potřeby
  • Velký dotykový displej
  • Porty RS232 a RS485
  • Podpora komunikačního protokolu IEC 61850
relé AMR
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Ochranné funkce

U<ANSI 27

Podpěťová ochrana

Trips when the voltage falls below the setting.

U>ANSI 59

Ochrana proti přepětí

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Nesměrová nadproudová ochrana

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Nesměrová ochrana uzemnění

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Směrová nadproudová ochrana

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Směrová ochrana uzemnění

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Nadproudová ochrana záporné složky

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Ochrana proti přetížení

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Ochrana proti selhání klíče

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

funkce detekce studené zátěže (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Funkce detekce náběhového proudu

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Diferenciální ochrana

Compares the currents into and out of the plant and clears faults inside the zone fast.

Funkce softwaru

01Má výkonné a snadno použitelné softwarové prostředí pro nastavení různých funkcí
02Možnost zaznamenat až 200 oscilografů, protokol výletů
03Má 4 regulační skupiny
04Softwarový modul Signal Routing pro přiřazování funkčních signálů k reléovým vstupům a výstupům
05Možnost výstupu nastavení relé ve formátu XRio

Reléové certifikáty

  • Výzkumný ústav energetiky