0%

Mga protection relay

AMR relay

  • Mga input sa kasamtangan ug boltahe kung gikinahanglan
  • Digital input ug output kung gikinahanglan
  • Dako nga touch screen
  • RS232 ug RS485 port
  • Suporta alang sa IEC 61850 nga protocol sa komunikasyon
AMR relay
  • IEC 61850

    communication protocol

  • RS232 · RS485

    serial ports

  • Touch

    large touch screen

Mga gimbuhaton sa pagpanalipod

U<ANSI 27

Undervoltage nga proteksyon

Trips when the voltage falls below the setting.

U>ANSI 59

Proteksyon sa sobrang boltahe

Trips when the voltage rises above the setting.

I>> / I>ANSI 50/51

Non-directional overcurrent nga proteksyon

Instantaneous (50) and IDMT time-delayed (51) tripping on overcurrent and short circuit.

IE>> / IE>ANSI 50N/51N

Non-directional grounding nga proteksyon

Instantaneous and time-delayed protection against residual current and phase-to-earth faults.

I> →ANSI 67

Direksyon nga overcurrent nga proteksyon

Overcurrent that checks the power direction, operating only for forward or reverse faults.

IE> →ANSI 67N

Pagpanalipod sa Direksyon sa Grounding

Directional earth fault, for ring networks and parallel feeders.

I2>ANSI 46

Ang negatibo nga bahin sa overcurrent nga proteksyon

Detects unbalance, broken conductors and single phasing from the negative-sequence current.

θ>ANSI 49

Sobra nga panalipod

A thermal model of the plant that trips before a cable, transformer or motor overheats.

CBFANSI 50BF

Pagpanalipod sa yawe nga kapakyasan

Trips the upstream breakers when a breaker fails to open after a trip command.

I> ↑CLP

Cold load detection function (CLP)

Raises the settings for a while after a long-dead feeder is re-energised, avoiding nuisance trips.

I2f / I1fInrush

Pag-agos sa kasamtangan nga function sa detection

Recognises transformer inrush from the second harmonic and blocks false trips.

Id>ANSI 87

Nagkalainlain nga proteksyon

Compares the currents into and out of the plant and clears faults inside the zone fast.

Mga bahin sa software

01Kini adunay kusgan ug dali gamiton nga palibot sa software alang sa pag-set up sa lainlaing mga gimbuhaton
02Abilidad sa pagrekord hangtod sa 200 ka oscillographs, trip log
03Adunay 4 ka grupo sa regulasyon
04Signal Routing software module para sa pag-assign sa function signal sa relay inputs ug outputs
05Abilidad sa pag-output sa mga setting sa relay sa format nga XRio

Mga sertipiko sa relay

  • Power Research Institute